RAFTERNEST • FREE PROJECT TOOL

Estimate the amount of paint for a project using the paintable surface area, number of coats, and coverage stated on the product label.

US customary & metric units Instant estimate No sign-up required

Paint coverage and wall surface diagramA simple room wall divided into measurable wall sections, with a paint roller and a paint coverage area illustration.PAINTABLE SURFACE AREA × COATSSURFACE
Estimate the total paintable surface, account for the number of coats, and divide by the coverage rate printed on the paint container. Windows and doors should be excluded from the measured area where appropriate.

RAFTERNEST CALCULATOR

Paint Coverage Calculator

Estimate paint quantity from surface area, number of coats and product coverage.

YOUR RESULTS

Calculation results

Enter your measurements to see the result.

About this calculation

Results are estimates based on the inputs provided.

Always verify measurements on site and confirm product coverage, local requirements and installation details with the manufacturer or a qualified roofing professional. This tool is not structural, engineering or contractor advice.

How to Use This Calculator

Measure the combined surface area you intend to paint, excluding large openings such as windows and doors where appropriate. Enter the number of coats recommended for the job, then use the coverage rate shown on the exact paint product label. The extra allowance helps account for minor application losses and uneven absorption.

How Paint Coverage Is Calculated

Formula: Paint volume = paintable surface area × number of coats × (1 + extra allowance ÷ 100) ÷ product coverage per unit.

Worked Example

Suppose you need to paint 500 sq ft, plan to apply 2 coats, and the paint label states coverage of 350 sq ft per US gallon. Add a 10% allowance: 500 × 2 × 1.10 ÷ 350 = 3.14 US gallons. This is an estimated volume; check the product’s available container sizes and buy enough to complete the project consistently.

Common Measurement Mistakes

  • Entering floor area when the calculator needs the total wall or ceiling surface area being painted
  • Forgetting to multiply by the number of coats
  • Using a generic coverage rate instead of the rate on the exact paint product label
  • Ignoring porous, textured, patched, or previously unpainted surfaces that may absorb more paint
  • Mixing square feet per gallon with square metres per litre

Frequently Asked Questions

How much area does one gallon of paint cover?

Coverage varies by product and surface. Many interior paints list a coverage figure on the container, but always use the manufacturer’s stated rate for the paint you plan to buy.

Should I include more than one coat?

Yes. Enter the total number of coats you expect to apply. A primer coat is a separate product and should be estimated separately if it is part of the project.

Does the calculator account for surface texture?

No. The calculator applies the coverage rate you provide. Rough, porous, or unsealed surfaces can use more paint than smooth, sealed surfaces, so follow the product instructions and adjust your estimate where needed.

Important Limitations

Paint coverage is affected by the product formulation, surface condition, application tool, temperature, and preparation. This calculator is a planning estimate, not a guarantee of actual coverage. Follow the manufacturer’s instructions, prepare the surface correctly, and confirm quantities with your paint supplier when needed.

Related Project Planning

Planning a wider renovation? You can also use the Roof Area Calculator for a basic roof surface estimate or the Roofing Squares Calculator to convert a measured roof area into roofing squares.